2N- Dimming without control line; self-dimming

The luminaire’s electronic control gear has a programmed timer that reduces the power by half 4.5 hours after it is turned on.

2N+ Dimming with control line

The electronic control gear has an input that connects it to the electrical cabinet. When the cabinet activates the voltage on the control line, the device delivers 100% of the nominal power to the Istanium LED module. When the cabinet disconnects the control line (0 volts), the device reduces the power by half.

CAD cabinet amplitude dimming

The luminaire’s electronic control gear adapts to the supply current of the Istanium LED modules, in proportion to the line input voltage. The amplitude dimming electrical cabinet must have a device that regulates the line voltage to reduce the light level of the luminaire. This dimming type is ideal to take advantage of installations with existing cabinet equipment installations.

1N without dimming

The electronic control gear delivers 100% of the power without a dimming option. If there is any fluctuation in the device’s line voltage, the supply current of the Istanium LED modules compensates to maintain the light flux (input voltage from 208 to 277 VAC). Likewise, if the electrical cabinet has a cabinet amplitude dimming device, the device will not dim the lamp (requires an Istanium LED luminaire with CAD dimming)

1-10 Dimming governed by 1-10V protocol

The electronic control gear delivers the output power to the Istanium LED modules according to the level indicated by the 1-10 signal (normally delivered by a remote management device).

DALI dimming regulated by DALI protocol

The electronic control gear delivers the output power to the Istanium LED modules according to the level indicated by the DALI signal (normally delivered by a remote management device).

DMX dimming via control line

Electronic protocol used to control professional lighting devices, allowing communication between the lighting control gear and the light sources themselves.

IP66

Totally dust proof. Protected against strong water projections or against rough seas.

IK10

Protected against 20 Joules of external mechanical impact by an object with a mass of 5 Kg from a height of 400 mm.

UNE-EN 62031

General lighting LED modules. Safety requirements.

UNE-EN 60598-1

Luminaires. Part 1: General requirements and tests.

UNE-EN 60598-2-3

Public lighting luminaires. Part 2: corresponds to the specific type of luminaire being studied

UNE-EN 62493

Evaluation of lighting equipment related to human exposure to electromagnetic fields.

UNE-EN 61000-2-3

Electromagnetic compatibility (EMC). Part 3-2: Limits. Limits for harmonic current emissions (equipment with input current ≤ 16 A per phase).

UNE-EN 61000-3-3

Electromagnetic compatibility (EMC). Part 3-3: Limits. Limitation of voltage changes and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase not subject to conditional connection.

UNE-EN 55015

Limitation and methods for measuring characteristics related to the radio-electrical disturbance of electrical lighting and similar equipment

UNE-EN 61547

General-use lighting equipment. Requirements related to EMC immunity.

UNE-EN 61347-2-13

Lamp control devices. Part 2-13: Particular requirements for electronic control devices powered by direct current or alternating current for LED modules.

UNE-EN 62471:2009

Photo-biological safety of lamps and lamp systems.

UNE-EN 50581

Technical documentation for the evaluation of electrical and electronic products with respect to the restriction of hazardous substances

4,000 K

Neutral white light

3,000 K

Warm white light

2,700 K

Soft white light

RGB

RGB with DMX/DALI dimming

RGBW

RGB + Neutral daylight with DMX/DALI dimming