)
Simon Nath M
Simon Nath M Istanium LED road luminaire, die-cast aluminium body. Lateral and post-top fixing using the same part. Designed for motorways, avenues, industrial spaces and urban cycle paths. ENEC certified with Environmental Product Declaration.
)
Single-body luminaire with two independent thermal separation compartments: optical group accessible from the bottom and electrical group from the top. Non-visible thermal dissipation fins that extend the optimum performance of the LEDs. Self-cleaning design that maintains light performance over time.
)
Simon has various production centres of its own, both in Spain and in other parts of the world. All of them are equipped with technical advances that allow us to comply with another of the principles that are the basis of our success: the carrying out of demanding tests and controls that guarantee the quality of all our products.
)
)
The Simon configurator allows you to select the technical, aesthetic and lighting characteristics of the most suitable luminaires for each space.
See detail)
2N- with dimming without control line; self-regulation
The luminaire's electronic driver has a programmed timer that reduces power by half after 4.5 h from switch-on.
2N+ dimming via control line
The electronic driver has an input connected to the electrical cabinet. When the cabinet activates the voltage on the control line, the driver delivers 100% of the nominal power to the Istanium LED module. When the cabinet disconnects the control line (0 volts), the driver reduces power by half.
CAD dimming via headline flux
The luminaire's electronic driver adjusts the supply current of the Istanium LED modules proportionally to the input voltage of the line. The headline electrical cabinet must have equipment that regulates the line voltage to reduce the luminaire's light level. This type of dimming is ideal for making use of installations with cabinet equipment already installed.
1N without dimming
The electronic driver delivers 100% of the power with no option to be dimmed. If there is any fluctuation in the line voltage, the driver compensates the supply current of the Istanium LED modules to maintain the luminous flux (input voltage from 208 to 277 Vac). Likewise, if the electrical cabinet has a headline flux dimming equipment, the driver will not dim the lamp (an Istanium LED luminaire with CAD dimming is required).
1-10 dimming governed by 1-10V protocol
The electronic driver delivers the output power to the Istanium LED modules according to the level indicated by the 1-10 signal (usually delivered by a remote management device)
DALI dimming governed by DALI protocol
The electronic driver delivers the output power to the Istanium LED modules according to the level indicated by the DALI signal (usually delivered by a remote management device)
MORE INFORMATION
To go further
)
)
)
)
)