Simon Skat MPF
Simon Skat M Istanium LED® decorative urban luminaire, die-cast aluminium, post-top fastening.
It provides necessary lighting in urban and private environments with maximum energy efficiency:
- Light flux > 3370 lm
- Savings up to 65%
- Efficiency up to 138 lm/W
Firm commitment to lighting flexibility and elegance with Skat M
Decorative luminaire that applies innovative technical concepts to offer excellent lighting flexibility, allowing it to be used in multiple urban and private environments
The most appropriate application for projection in patios, squares or parks is to use SA optics, symmetrical type.
In private community areas where the lighting requirements go through a good average uniformity, we project with SA optics, symmetrical type.
Configure the Skat M Istanium LED Luminaire to suit you
Simon's configurator provides high quality light reducing light pollution and energy consumption
2N- with regulation without control line; self-regulation
The electronic equipment of the luminaire has a programmed timer that reduces the power by half after 4.5 hours from the moment of switching on.
1N without regulation
The electronic equipment delivers 100% of the power with no option to be regulated. If there is any fluctuation in the line voltage, the equipment compensates the supply current of the Istanium LED modules to maintain the luminous flux (input voltage from 208 to 277 Vac). Similarly, if the electrical cabinet has a flow regulation unit at the head, the unit will not regulate the lamp (an Istanium LED luminaire with CAD regulation is required).
1-10 Regulation governed by protocol 1-10V
The electronic equipment delivers the output power to the Istanium LED modules according to the level indicated by the 1-10 signal (normally delivered by a remote management device).
DALI regulation governed by DALI protocol
The electronic equipment delivers the output power to the Istanium LED modules according to the level indicated by the DALI signal (normally delivered by a remote management device).
IP65
Completely dustproof. Protected against water jets.
IP66
Completely dustproof. Protected against strong jets of water or heavy seas.
IK08
Protection against external mechanical shocks of 5 J of energy and 1.7 Kg/295 mm of mass and height of the impact piece.
Body
Aluminum base
Closure system
By stainless steel screws
Serpentine: GTF
Unbreakable Tempered Clear Flat Glass
MTT
Four-sided transparent methacrylate
MOT
Engraved opal methacrylate
UNE-EN 60598-2-3
Public lighting devices. Part 2: corresponding to the particular type of luminaire studied.
UNE-EN 62493
Evaluation of lighting equipment with respect to human exposure to electromagnetic fields.
UNE-EN 61000-2-3
Electromagnetic compatibility (EMC). Part 3-2: Limits. Harmonic current emission limits (equipment with input current <= 16 A per phase).
UNE-EN 55015
Limits and methods of measurement of the characteristics linked to radioelectric disturbances of lighting and similar devices.
UNE-EN 61547
General purpose lighting equipment. EMC immunity requirements.
UNE-EN 50581
Technical documentation for the evaluation of electrical and electronic products with respect to the restriction of hazardous substances.
4,000K
Neutral white light
3,000K
Warm white light
2,700K
Soft white light
XDL 2,200K
Extra warm white light.
APC
Amber turned into phosphorus.
Protection degree IK08 - IP66
Class
Certifications CE - ENEC
Weight 8 kg
Color temperatures NDL 4.000 K, WDL 3.000 K, SDL 2.700 K, APC
Color rendering index >70
Upper hemisphere flow <1% (zonas E1)
LED Duration (L90 B10 a Ta=25 ºC y Tj=95 ºC) 100.000 h
Photometric distribution (Optics) RG/ RJ/ RA/ RE/ SA/ RF/ RW
