Nath M

Simon Nath M

Simon Nath M Istanium LED® Road Luminaire, size M, die-cast aluminium and 5° angled lateral fixing and 0° angle post-top fastening.


The Simon Nath LED Road luminaire, size M, was designed as a solution for different road lighting applications, such as highways, roads, industrial spaces, pedestrian areas, residential areas, roundabouts and intersections, functional roads, streets and avenues, parking areas, sports facilities and large commercial warehouses.

Motorways and highways
Industrial spaces
Roundabouts intersections
Parking area
Urban cycle path
Green trails

Configure the Nath M LED Luminaire to measure according to the type of space

Simon's configurator allows you to select the technical, aesthetic and lighting characteristics of the luminaires that are most suitable for a specific space.


2N- Dimming without control line; self-dimming

The luminaire’s electronic control gear has a programmed timer that reduces the power by half 4.5 hours after it is turned on.


2N+ Dimming with control line

The electronic control gear has an input that connects it to the electrical cabinet. When the cabinet activates the voltage on the control line, the device delivers 100% of the nominal power to the Istanium LED module. When the cabinet disconnects the control line (0 volts), the device reduces the power by half.


CAD cabinet amplitude dimming

The luminaire’s electronic control gear adapts to the supply current of the Istanium LED modules, in proportion to the line input voltage. The amplitude dimming electrical cabinet must have a device that regulates the line voltage to reduce the light level of the luminaire. This dimming type is ideal to take advantage of installations with existing cabinet equipment installations.


1N without dimming

The electronic control gear delivers 100% of the power without a dimming option. If there is any fluctuation in the device’s line voltage, the supply current of the Istanium LED modules compensates to maintain the light flux (input voltage from 208 to 277 VAC). Likewise, if the electrical cabinet has a cabinet amplitude dimming device, the device will not dim the lamp (requires an Istanium LED luminaire with CAD dimming)


1-10 Dimming governed by 1-10V protocol

The electronic control gear delivers the output power to the Istanium LED modules according to the level indicated by the 1-10 signal (normally delivered by a remote management device).


DALI dimming regulated by DALI protocol

The electronic control gear delivers the output power to the Istanium LED modules according to the level indicated by the DALI signal (normally delivered by a remote management device).



Totally dustproof. Protected against water jets.



Totally dustproof. Protected against strong jets of water or heavy seas.



Protection against external mechanical impact of 5 J of energy and 1.7 Kg/295 mm of mass and height of the striking piece.

Materials and Finishes


Die-cast aluminum


Fixation System

Galvanized and painted steel sheet


Closure system

Painted die-cast aluminum lever



Shatterproof Flat Clear Tempered Glass



Die-cast aluminum

Regulations and Certification

UNE-EN 62031

LED modules for general lighting. Security requirements.

UNE-EN 60598-1

luminaries. Part 1: General requirements and tests.


UNE-EN 60598-2-3

Public lighting luminaires. Part 2: corresponding to the particular type of luminaire under study


UNE-EN 62493

Evaluation of lighting equipment in relation to human exposure to electromagnetic fields.


UNE-EN 61000-2-3

Electromagnetic compatibility (EMC). Part 3-2: Limits. Limits for harmonic current emissions (equipment with input current <= 16 A per phase).


UNE-EN 61000-3-3

Electromagnetic compatibility (EMC). Part 3-3: Limits. Limitation of voltage variations, voltage fluctuations and flicker in public low voltage supply networks for equipment with rated current <= 16 A per phase and not subject to conditional connection.


UNE-EN 55015

Limits and methods of measurement of the characteristics related to radioelectric disturbance of lighting equipment and similar.


UNE-EN 61547

Lighting equipment for general use. Requirements relating to EMC immunity.


UNE-EN 61347-2-13

Lamp control devices. Part 2-13: Particular requirements for electronic control devices powered with direct current or alternating current for LED modules.


UNE-EN 62471:2009

Photobiological safety of lamps and devices that use lamps.


UNE-EN 50581

Technical documentation for the evaluation of electrical and electronic products with regard to the restriction of hazardous substances

Color temperature

4.000 K

Neutral white light


3.000 K

Warm white light


2.700 K

Soft white light


XDL 2.200 K

Extra warm white light



Phosphor-Converted Amber

Technical features

Protection degree   IK10 - IP66 - IP44


Certificates   ENEC

Weight   7,5 kg

Color temperatures   NDL 4.000 K, WDL 3.000 K, SDL 2.700 K, XDL 2.200 K, APC

Color rendering index  >70

upper hemisphere flow   <1% (zonas E1)

LED Duration (L90 B10 a Ta=25 ºC y Tj=95 ºC)   100.000 h

Photometric distribution (Optics)   RG/ RJ/ RA/ RE/ RF/ RW

Simon Urban Solutions Catalogue
Simon Nath - Technical Sheet
Fotometrías Nath M
Ficheros CAD Nath M
Manual de instalación Nath M
Declaración de conformidad Nath M
Simon Nath - Environmental Product Declaration EPD