Learn everything you need to know to prescribe, install and configure the Simon iO ecosystem.
Simon Milos S Istanium LED spotlight, size S, made of die-cast aluminium. Bracket fastening.
It provides necessary public lighting with maximum energy efficiency:
Configure the Milos S Istanium LED Luminaire to suit you
Simon's configurator provides high quality light reducing light pollution and energy consumption
2N- with regulation without control line; self-regulation
The electronic equipment of the luminaire has a programmed timer that reduces the power by half after 4.5 hours from the moment of switching on.
2N+ control line regulation
The electronic equipment has an input that connects to the electrical cabinet. When the cabinet activates the voltage in the control line, the equipment delivers 100% of the nominal power to the Istanium LED module. When the cabinet disconnects the control line (0 volts), the equipment reduces power by half.
CAD regulation by header flow
The electronic equipment of the luminaire adapts the supply current of the Istanium LED modules in a proportional way to the input voltage of the line. The head electrical cabinet must have equipment that regulates the line voltage to reduce the light level of the luminaire. This type of regulation is ideal for taking advantage of installations with cabinet equipment already installed.
1N without regulation
The electronic equipment delivers 100% of the power with no option to be regulated. If there is any fluctuation in the line voltage, the equipment compensates the supply current of the Istanium LED modules to maintain the luminous flux (input voltage from 208 to 277 Vac). Similarly, if the electrical cabinet has a flow regulation unit at the head, the unit will not regulate the lamp (an Istanium LED luminaire with CAD regulation is required).
1-10 Regulation governed by protocol 1-10V
The electronic equipment delivers the output power to the Istanium LED modules according to the level indicated by the 1-10 signal (normally delivered by a remote management device).
DALI regulation governed by DALI protocol
The electronic equipment delivers the output power to the Istanium LED modules according to the level indicated by the DALI signal (normally delivered by a remote management device).
Totally dustproof. Protected against water jets.
Totally dustproof. Protected against strong jets of water or heavy seas.
Protection against external mechanical impact of 5 J of energy and 1.7 Kg/295 mm of mass and height of the striking piece.
Galvanized and painted steel sheet
Painted die-cast aluminum lever
Shatterproof Flat Clear Tempered Glass
LED modules for general lighting. Security requirements.
luminaries. Part 1: General requirements and tests.
Public lighting luminaires. Part 2: corresponding to the particular type of luminaire under study
Evaluation of lighting equipment in relation to human exposure to electromagnetic fields.
Electromagnetic compatibility (EMC). Part 3-2: Limits. Limits for harmonic current emissions (equipment with input current <= 16 A per phase).
Electromagnetic compatibility (EMC). Part 3-3: Limits. Limitation of voltage variations, voltage fluctuations and flicker in public low voltage supply networks for equipment with rated current <= 16 A per phase and not subject to conditional connection.
Limits and methods of measurement of the characteristics related to radioelectric disturbance of lighting equipment and similar
Lighting equipment for general use. Requirements relating to EMC immunity.
Lamp control devices. Part 2-13: Particular requirements for electronic control devices powered with direct current or alternating current for LED modules.
Photobiological safety of lamps and devices that use lamps.
Technical documentation for the evaluation of electrical and electronic products with regard to the restriction of hazardous substances
Neutral white light
Warm white light
Soft white light
Extra warm white light.
Protection degree IK08 - IP66
Certificates CE - ENEC
Weight 6,2 kg
Color temperatures NDL 4.000 K, WDL 3.000 K, SDL 2.700 K, APC
Color rendering index >70
LED Duration (L90 B10 a Ta=25 ºC y Tj=95 ºC) 100.000 h
Photometric distribution (Optics) SA/ TRF/ TRI/ TA/ CIN/ CME/ CMM/ EW/ RF/ RW