2N- Dimming without control line; self-dimming

The luminaire’s electronic control gear has a programmed timer that reduces the power by half 4.5 hours after it is turned on.

2N+ Dimming with control line

The electronic control gear has an input that connects it to the electrical cabinet. When the cabinet activates the voltage on the control line, the device delivers 100% of the nominal power to the Istanium LED module. When the cabinet disconnects the control line (0 volts), the device reduces the power by half.

CAD cabinet amplitude dimming

The luminaire’s electronic control gear adapts to the supply current of the Istanium LED modules, in proportion to the line input voltage. The amplitude dimming electrical cabinet must have a device that regulates the line voltage to reduce the light level of the luminaire. This dimming type is ideal to take advantage of installations with existing cabinet equipment installations.

1N without dimming

The electronic control gear delivers 100% of the power without a dimming option. If there is any fluctuation in the device’s line voltage, the supply current of the Istanium LED modules compensates to maintain the light flux (input voltage from 208 to 277 VAC). Likewise, if the electrical cabinet has a cabinet amplitude dimming device, the device will not dim the lamp (requires an Istanium LED luminaire with CAD dimming)

1-10 Dimming governed by 1-10V protocol

The electronic control gear delivers the output power to the Istanium LED modules according to the level indicated by the 1-10 signal (normally delivered by a remote management device).

DALI dimming regulated by DALI protocol

The electronic control gear delivers the output power to the Istanium LED modules according to the level indicated by the DALI signal (normally delivered by a remote management device).

IP66

Totally dustproof. Protected against strong jets of water or heavy seas.

IK09

Protection against external mechanical impact of 10 J of energy and 5 Kg/200 mm of mass and height of the hitting piece.

IK10

Protection against external mechanical impact of 20 J of energy and 5 Kg/400 mm of mass and height of the striking piece.

Body

Die-cast aluminum

Fixation System

Galvanized and painted steel sheet

Closure system

Painted die-cast aluminum lever

Diffuser

Shatterproof Flat Clear Tempered Glass

Deck

Die-cast aluminum

UNE-EN 60598-2-3

Public lighting luminaires. Part 2: corresponding to the particular type of luminaire under study.

UNE-EN 62493

Evaluation of lighting equipment in relation to human exposure to electromagnetic fields.

UNE-EN 61000-2-3

Electromagnetic compatibility (EMC). Part 3-2: Limits. Limits for harmonic current emissions (equipment with input current <= 16 A per phase).

UNE-EN 55015

Limits and methods of measurement of the characteristics related to radioelectric disturbance of lighting equipment and the like.

UNE-EN 61547

Lighting equipment for general use. Requirements relating to EMC immunity.

UNE-EN 50581

Technical documentation for the evaluation of electrical and electronic products with respect to the restriction of hazardous substances.

4.000 K

Neutral white light

3.000 K

Warm white light

2.700 K

Soft white light

XDL 2.200 K

Extra warm white light

PCA

Phosphor-Converted Amber

Protection degree   IK10 - IK09 - IP66

Class

Certificates   CE - ENEC

Weight   8 kg

Color temperatures   NDL 4.000 K, WDL 3.000 K, SDL 2.700 K, APC

Color rendering index   >70

Upper hemisphere flow    <1% (zonas E1)

LED Duration (L90 B10 a Ta=25 ºC y Tj=95 ºC)   100.000 h

Photometric distribution (Optics)   RG/ RJ/ RA/ RE/ SA/ SB/ RF/ RW