Discover the details of the new finishes
Simon Kelp Merak
Simon KELP MERAK decorative lighting point, up to 9 m high, with cylindrical shaft and lateral luminaire fastening on arms up to 0.75 m long.
Supported by a flat flange plate with reinforcing ring and gusset, shaft and arm made of S235JR-quality sheet carbon steel. Flush trapdoor with interior reinforcement. Lateral luminaire fastening via direct anchoring on the body, without coupling, Ø60 mm.
Configure the Kelp Merak Istanium LED luminaire to suit your needs
Simon’s configurator provides high-quality light to reduce light pollution and energy consumption.
2N- Dimming without control line; self-dimming
The luminaire’s electronic control gear has a programmed timer that reduces the power by half 4.5 hours after it is turned on.
2N+ Dimming with control line
The electronic control gear has an input that connects it to the electrical cabinet. When the cabinet activates the voltage on the control line, the device delivers 100% of the nominal power to the Istanium LED module. When the cabinet disconnects the control line (0 volts), the device reduces the power by half.
CAD cabinet amplitude dimming
The luminaire’s electronic control gear adapts to the supply current of the Istanium LED modules, in proportion to the line input voltage. The amplitude dimming electrical cabinet must have a device that regulates the line voltage to reduce the light level of the luminaire. This dimming type is ideal to take advantage of installations with existing cabinet equipment installations.
1N without dimming
The electronic control gear delivers 100% of the power without a dimming option. If there is any fluctuation in the device’s line voltage, the supply current of the Istanium LED modules compensates to maintain the light flux (input voltage from 208 to 277 VAC). Likewise, if the electrical cabinet has a cabinet amplitude dimming device, the device will not dim the lamp (requires an Istanium LED luminaire with CAD dimming)
1-10 Dimming governed by 1-10V protocol
The electronic control gear delivers the output power to the Istanium LED modules according to the level indicated by the 1-10 signal (normally delivered by a remote management device).
DALI dimming regulated by DALI protocol
The electronic control gear delivers the output power to the Istanium LED modules according to the level indicated by the DALI signal (normally delivered by a remote management device).
Totally dust proof. Protected against strong water projections or against rough seas.
Protected against 10 Joules of external mechanical impact by an object with a mass of 5 Kg from a height of 200 mm.
Protected against 20 Joules of external mechanical impact by an object with a mass of 5 Kg from a height of 400 mm.
Painted galvanised sheet steel
Painted die-cast aluminium lever
Flat transparent shatter-proof tempered glass
Public lighting luminaires. Part 2: corresponds to the specific type of luminaire being studied
Evaluation of lighting equipment related to human exposure to electromagnetic fields.
Electromagnetic compatibility (EMC). Part 3-2: Limits. Limits for harmonic current emissions (equipment with input current ≤ 16 A per phase).
Limitation and methods for measuring characteristics related to the radio-electrical disturbance of electrical lighting and similar equipment.
General-use lighting equipment. Requirements related to EMC immunity.
Technical documentation for the evaluation of electrical and electronic products regarding the restriction of dangerous substances.
Neutral white light
Warm white light
Soft white light
XDL 2.200 K
Extra warm white light.
Protection level IP66 - IK09 - IK10
Weight 10 kg
Color temperatures NDL 4.000 K, WDL 3.000 K, SDL 2.700 K, APC
Colour rendering index >70
Upper hemisphere light flux <1% (zonas E1)
LED Duration (L90 B10 a Ta=25 ºC y Tj=95 ºC) 100.000 h
Photometric distribution (Optics) RG/ RJ/ RA/ RE/ SA/ RF/ RW