Simon Kelp Altair

Simon Kelp Altair

Simon KELP ALTAIR decorative lighting point, up to 9 m high, with cylindrical shaft and lateral luminaire fastening on arms up to 0.75 m long.


Configure the Kelp Altair Istanium LED luminaire to suit your needs

Simon’s configurator provides high-quality light to reduce light pollution and energy consumption.


2N- Dimming without control line; self-dimming

The luminaire’s electronic control gear has a programmed timer that reduces the power by half 4.5 hours after it is turned on.


1N without dimming

The electronic control gear delivers 100% of the power without a dimming option.

If there is any fluctuation in the device’s line voltage, the supply current of the Istanium LED modules compensates to maintain the light flux (input voltage from 208 to 277 VAC).

Likewise, if the electrical cabinet has a cabinet amplitude dimming device, the device will not dim the lamp (requires an Istanium LED luminaire with CAD dimming)



Totally dust proof. Protected against strong water projections or against rough seas.



Protected against 10 Joules of external mechanical impact by an object with a mass of 5 Kg from a height of 200 mm.



Protected against 20 Joules of external mechanical impact by an object with a mass of 5 Kg from a height of 400 mm.

Materials and finishes


Die-cast aluminium



Die-cast aluminium


Closure system

Painted die-cast aluminium lever



Flat transparent shatter-proof tempered glass



Structural sheet steel


Arm trim

Die-cast aluminium



Structural sheet steel

Regulations and Certification

UNE-EN 60598-1

Luminaires. Part 1: General requirements and tests.


UNE-EN 60598-2-3

Public lighting luminaires. Part 2: corresponds to the specific type of luminaire being studied


UNE-EN 62493

Evaluation of lighting equipment related to human exposure to electromagnetic fields.


UNE-EN 61000-2-3

Electromagnetic compatibility (EMC). Part 3-2: Limits. Limits for harmonic current emissions (equipment with input current ≤ 16 A per phase).


UNE-EN 61000-3-3

Electromagnetic compatibility (EMC). Part 3-3: Limits. Limitation of voltage changes and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase not subject to conditional connection.


UNE-EN 55015

Limitation and methods for measuring characteristics related to the radio-electrical disturbance of electrical lighting and similar equipment


UNE-EN 61547

General-use lighting equipment. Requirements related to EMC immunity.


UNE-EN 61347-2-13

Lamp control devices. Part 2-13: Particular requirements for electronic control devices powered by direct current or alternating current for LED modules.


UNE-EN 62471:2009

Photo-biological safety of lamps and lamp systems.


UNE-EN 40-5

Lighting columns and poles. Part 5: Requirements for steel lighting columns and poles.

Colour Temperature

4.000 K

Neutral white light


3.000 K

Warm white light


2.700 K

Soft white light





Flange plate

4 gusset

Catálogo Soluciones Urbanas Nº 81
Simon Kelp - Ficha Técnica
Simon Kelp colores