Simon Alya

Simon Alya

Simon Alya Istanium LED urban decorative luminaire, made of die-cast aluminium, for lateral or suspended fastening. It provides necessary public lighting with maximum energy efficiency:

 

  • Light flux > 3370 lm.
  • Savings up to 65%.
  • Efficiency up to 144 lm/W
Propierties
Avenue
Street
Roundabouts intersections
Garden park
Crosswalk
Square
Parking area
Commercial areas

Configure the Alya Istanium LED Luminaire to measure according to the type of space

Simon's configurator allows you to select the technical, aesthetic and lighting characteristics of the luminaires that are most suitable for a specific space.

imatge_conf_alya
Regulation

2N- with regulation without control line; self-regulation

The electronic equipment of the luminaire has a programmed timer that reduces the power by half after 4.5 hours from the moment of switching on.

 

2N+ Control line regulation

The electronic equipment has an input that is connected to the electrical cabinet. When the cabinet activates the control line voltage, the equipment delivers 100% of the nominal power to the Istanium LED module. When the cabinet disconnects the control line (0 volts), the equipment cuts power in half.

 

CAD Head flow regulation

The luminaire's electronic equipment adapts the supply current of the Istanium LED modules proportionally to the line input voltage. The head electrical cabinet must have a device that regulates the line voltage to reduce the lighting level of the appliance. This type of regulation is ideal for taking advantage of installations with cabinet equipment already installed.

 

1N without regulation

The electronic equipment delivers 100% of the power with no option to be regulated. If there is any fluctuation in the line voltage, the equipment compensates the supply current of the Istanium LED modules to maintain the luminous flux (input voltage from 208 to 277 Vac). Similarly, if the electrical cabinet has a flow regulation unit at the head, the unit will not regulate the lamp (an Istanium LED luminaire with CAD regulation is required).

 

1-10 Regulation governed by protocol 1-10V

The electronic equipment delivers the output power to the Istanium LED modules according to the level indicated by the 1-10 signal (normally delivered by a remote management device).

 

DALI regulation governed by DALI protocol

The electronic equipment delivers the output power to the Istanium LED modules according to the level indicated by the DALI signal (normally delivered by a remote management device).

Protection

IP65

Completely dustproof. Protected against water jets.

 

IP66

Completely dustproof. Protected against strong jets of water or heavy seas.

 

IK08

Protection against external mechanical shocks of 5 J of energy and 1.7 Kg/295 mm of mass and height of the impact piece.

Materials and finishes

Body

Die-cast aluminum

 

Fixation System

Galvanized and painted steel sheet

 

Closure system

Painted die-cast aluminum lever

 

Diffuser

Unbreakable Flat Clear Tempered Glass

 

Deck

Die-cast aluminum

Regulation and certification

UNE-EN 62031

LED modules for general lighting. Security requirements

UNE-EN 60598-1

luminaries. Part 1 : General requirements and tests

 

UNE-EN 60598-2-3

Public lighting luminaires. Part 2 : corresponding to the particular type of luminaire studied

 

UNE-EN 62493

Evaluation of lighting equipment with respect to human exposure to electromagnetic fields

 

UNE-EN 61000-2-3

Electromagnetic compatibility (EMC). Part 3-2 : Limits. Harmonic current emission limits (equipment with input current <= 16 A per phase).

 

UNE-EN 61000-3-3

Electromagnetic compatibility (EMC). Part 3-3 : Limits. Limitation of voltage variations, voltage fluctuations and flicker in public low voltage power supply networks for equipment with nominal current <= 16 A per phase and not subject to conditional connection.

 

UNE-EN 55015

Limitation of voltage variations, voltage fluctuations and flicker in public low voltage power supply networks for equipment with nominal current <= 16 A per phase and not subject to conditional connection.

 

UNE-EN 61547

General purpose lighting equipment. EMC immunity requirements.

 

UNE-EN 61347-2-13

Lamp control devices. Part 2-13: Particular rules for electronic control devices powered with direct current or alternating current for LED modules.

 

UNE-EN 62471:2009

Photobiological safety of lamps and devices that use lamps.

 

UNE-EN 50581

Technical documentation for the evaluation of electrical and electronic products with regard to the restriction of hazardous substances

Color Temperature

4,000K

Neutral white light

 

3,000K

Warm white light

 

2,700K

Soft white light

 

XDL 2,200K

Extra warm white light.

 

APC

Amber turned into phosphorus.

Technical characteristics

Protection degree   IK08 - IP66 - IP65

Class

Certificates   CE - ENEC

Weight   13 kg

Color temperatures   NDL 4.000 K, WDL 3.000 K, SDL 2.700 K, APC

Color rendering index   >70

Upper hemisphere flow    <1% (zonas E1)

LED Duration (L90 B10 a Ta=25 ºC y Tj=95 ºC)   100.000 h

Photometric distribution (Optics)   RG/ RJ/ RA/ RE/ E1/ SA/ SB/ RF/ RW

 
Declaración de conformidad Alya
 
Ficha técnica Alya
 
Fotometrías Alya
 
Ficheros CAD Alya
 
Acabados de color
 
Manual de instalación Alya