Simon Nath S
Simon NATH S Istanium LED Road luminaire, die-cast aluminium, lateral/adjustable post-top fastening.
It provides necessary public lighting with maximum energy efficiency:
- Luminous flux of greater than 32,000 lm
- Savings up to 65%
- Efficiency up to 142 lm/W
- Guaranteed thermal management
Simon has different own production centers, both in Spain and in other parts of the world. All of them are equipped with technical advances that allow us to comply with another of the principles that are the basis of our success: the performance of demanding tests and controls that guarantee the quality of all our products
Single-body luminaire with two independent thermal separation compartments, for the optical group, which can be accessed from the bottom, and for the electrical group, which can be accessed from the top.
It allows an extension of optimum performance of the LEDs at high supply currents, therefore extending the service life of the luminaire, through non-visible fins.
Advanced design that allows water to drain without damaging the luminaire, allowing self-cleaning and maintenance of light performance over time.
Post-top and side fixing
Areas of application
The Simon Nath L Istanium LED Road luminaire was designed as a solution for different road lighting applications, such as highways, roads, industrial spaces, pedestrian areas, residential areas, roundabouts and intersections, functional roads, streets and avenues, parking areas, sports facilities and large commercial warehouses.
Public road lighting with RJ optics that allows a balance between efficiency and comfort, creating a space with soft light that invites the passerby to walk.
Lighting with RJ optics that directs the frontal light to cover a greater totality of the surface, creating a feeling of comfort throughout the parking, thanks to its good result both in the amount of light and in the uniformity.
Simon provides luminaires equipped with different dimming systems according to regulations, the space’s needs and technical specifications.
2N- Dimming without control line; self-dimming
The luminaire’s electronic control gear has a programmed timer that reduces the power by half 4.5 hours after it is turned on.
2N+ Dimming with control line
The electronic control gear has an input that connects it to the electrical cabinet. When the cabinet activates the voltage on the control line, the device delivers 100% of the nominal power to the Istanium LED module. When the cabinet disconnects the control line (0 volts), the device reduces the power by half.
CAD cabinet amplitude dimming
The luminaire’s electronic control gear adapts to the supply current of the Istanium LED modules, in proportion to the line input voltage. The amplitude dimming electrical cabinet must have a device that regulates the line voltage to reduce the light level of the luminaire. This dimming type is ideal to take advantage of installations with existing cabinet equipment installations.
1N without dimming
The electronic control gear delivers 100% of the power without a dimming option. If there is any fluctuation in the device’s line voltage, the supply current of the Istanium LED modules compensate to maintain the light flux (input voltage from 208 to 277 VAC). Likewise, if the electrical cabinet has a cabinet amplitude dimming device, the device will not dim the lamp (requires an Istanium LED luminaire with CAD dimming).
1-10 1-10 V protocol regulated dimming
The electronic control gear delivers the output power to the Istanium LED modules according to the level indicated by the 1-10 signal (normally delivered by a remote management device).
DALI DALI-protocol regulated dimming
The electronic control gear delivers the output power to the Istanium LED modules according to the level indicated by the DALI signal (normally delivered by a remote management device).
Light regulation systems
Simon develops its products according to specific protection standards in relation to the IP Code described in IEC Standard 60529. Degrees of protection provided by enclosures and the IK Code Described in IEC Standard 62262 (EN 50102). Degrees of protection provided by enclosures for electrical equipment against external impacts.
Totally dust proof. Protected against water streams.
Totally dust proof. Protected against strong water projections or against rough seas.
Protected against 5 Joules of external mechanical impact by an object with a mass of 1.7 Kg from a height of 295 mm.
Protected against 10 Joules of external mechanical impact by an object with a mass of 5 Kg from a height of 200 mm.
Protected against 20 Joules of external mechanical impact by an object with a mass of 5 Kg from a height of 400 mm.
IP and IK Protection Degrees
Stainless steel screws/Die-cast aluminium levers
Flat transparent shatter-proof tempered glass
Materials and color finishes and specific protections
Luminaires. Part 1: General requirements and tests.
Public lighting luminaires. Part 2: corresponds to the specific type of luminaire being studied.
Evaluation of lighting equipment related to human exposure to electromagnetic fields.
Electromagnetic Compatibility (EMC). Part 3-2: Limits. Limits for harmonic current emissions (equipment with input current ≤ 16 A per phase).
Electromagnetic Compatibility (EMC). Part 3-3: Limits. Limitation of voltage changes and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase not subject to conditional connection.
Limitation and methods for measuring characteristics related to the radio-electrical disturbance of electrical lighting and similar equipment.
General-use lighting equipment. Requirements related to EMC immunity.
Photo-biological safety of lamps and lamp systems.
National Regulations and European Directives
Colour is a lighting characteristic determined by the spectral composition of the light and its interaction with the human eye.
Neutral white light
Warm white light
Soft white light
Kelvin scale light color
Weight 6 kg
Color temperatures NDL 4.000 K, WDL 3.000 K, SDL 2.700 K, APC
Color rendering index >70
Upper hemisphere flow <1% (zonas E1)
LED duration (L90 B10 at Ta = 25 ºC and Tj = 95 ºC) 100.000 h
Photometric distribution (Optics) RG/ RJ/ RA/ RE/ E1/ AE/ RF/ RW
Discover the technical characteristics of this luminaire