RANGE

Simon Kos

Simon Kos Istanium LED Spotlight, size L, made of die-cast aluminium with bracket fastening.
It provides necessary public lighting with maximum energy efficiency.

Atributos

Design

Image

Design of a single body with independent housings for the optical group and the electrical group.

Thermal management

Effective lighting technology

Wiring

Areas of Application

Sport space

Facade

Big area

Monument

Bridge

Tunnel

Luminous Distributions

Select an optic

Related Ranges

Related columns

Related products

modal_tarjeta_1.4

Simon provides luminaires equipped with different dimming systems according to regulations, the space’s needs and technical specifications.

2N- Dimming without control line; self-dimming

The luminaire’s electronic control gear has a programmed timer that reduces the power by half 4.5 hours after it is turned on.

1N without dimming

The electronic control gear delivers 100% of the power without a dimming option. If there is any fluctuation in the device’s line voltage, the supply current of the Istanium LED modules compensate to maintain the light flux (input voltage from 208 to 277 VAC). Likewise, if the electrical cabinet has a cabinet amplitude dimming device, the device will not dim the lamp (requires an Istanium LED luminaire with CAD dimming).

1-10 1-10 V protocol regulated dimming

The electronic control gear delivers the output power to the Istanium LED modules according to the level indicated by the 1-10 signal (normally delivered by a remote management device).

DALI DALI-protocol regulated dimming

The electronic control gear delivers the output power to the Istanium LED modules according to the level indicated by the DALI signal (normally delivered by a remote management device).

Dimming

Light regulation systems

modal_tarjeta_2.4

Simon develops its products according to specific protection standards in relation to the IP Code described in IEC Standard 60529. Degrees of protection provided by enclosures and the IK Code Described in IEC Standard 62262 (EN 50102). Degrees of protection provided by enclosures for electrical equipment against external impacts.

IP66

Totally dust proof. Protected against strong water projections or against rough seas.

IK09

Protected against 10 Joules of external mechanical impact by an object with a mass of 5 Kg from a height of 200 mm.

Protection

IP and IK Protection Degrees

modal_tarjeta_4.1

Body

Die-cast aluminium

Cover

Die-cast aluminium

Closure system

Stainless steel screws/Die-cast aluminium levers

Diffuser

Flat transparent shatter-proof tempered glass

Materials and Finishes

Materials and color finishes and specific protections

modal_tarjeta_5.2

UNE-EN 60598-1

Luminaires. Part 1: General requirements and tests.

UNE-EN 60598-2-3

Public lighting luminaires. Part 2: corresponds to the specific type of luminaire being studied.

UNE-EN 61000-3-2

Electromagnetic Compatibility (EMC). Part 3-2: Limits. Limits for harmonic current emissions (equipment with input current ≤ 16 A per phase).

UNE-EN 61000-3-3

Electromagnetic Compatibility (EMC). Part 3-3: Limits. Limitation of voltage changes and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase not subject to conditional connection.

UNE-EN 55015

Limitation and methods for measuring characteristics related to the radio-electrical disturbance of electrical lighting and similar equipment.

UNE-EN 61547

General-use lighting equipment. Requirements related to EMC immunity.

UNE-EN 62471:2009

Photo-biological safety of lamps and lamp systems.

UNE-EN 61347-2-13

Lamp control devices. Part 2-13: Specific requirements for electronic control devices powered by a direct or alternating current for LED modules.

UNE-EN 61347-2-13

Dispositivos de control de lámpara. Parte 2-13: Requisitos particulares para dispositivos de control electrónicos alimentados con corriente continua o corriente alterna para módulos LED.

UNE-EN 62471:2009

Photo-biological safety of lamps and lamp systems.