RANGE
Simon Bora
Simon Bora Istanium LED
classic decorative urban luminaire, made of cast aluminium, with die-cast aluminium fastening and suspended fastening.
Simon Bora Istanium LED images
Simon Bora Istanium LED images
Related columns
Related products
modal_tarjeta_1.2
Simon provides luminaires equipped with different dimming systems according to regulations, the space’s needs and technical specifications.
2N- Dimming without control line; self-dimming
The luminaire’s electronic control gear has a programmed timer that reduces the power by half 4.5 hours after it is turned on.
2N+ Dimming with control line
The electronic control gear has an input that connects it to the electrical cabinet. When the cabinet activates the voltage on the control line, the device delivers 100% of the nominal power to the Istanium LED module. When the cabinet disconnects the control line (0 volts), the device reduces the power by half.
CAD cabinet amplitude dimming
The luminaire’s electronic control gear adapts to the supply current of the Istanium LED modules, in proportion to the line input voltage. The amplitude dimming electrical cabinet must have a device that regulates the line voltage to reduce the light level of the luminaire. This dimming type is ideal to take advantage of installations with existing cabinet equipment installations.
1N without dimming
The electronic control gear delivers 100% of the power without a dimming option. If there is any fluctuation in the device’s line voltage, the supply current of the Istanium LED modules compensate to maintain the light flux (input voltage from 208 to 277 VAC). Likewise, if the electrical cabinet has a cabinet amplitude dimming device, the device will not dim the lamp (requires an Istanium LED luminaire with CAD dimming).
1-10 1-10 V protocol regulated dimming
The electronic control gear delivers the output power to the Istanium LED modules according to the level indicated by the 1-10 signal (normally delivered by a remote management device).
DALI DALI-protocol regulated dimming
The electronic control gear delivers the output power to the Istanium LED modules according to the level indicated by the DALI signal (normally delivered by a remote management device).
Dimming
Light regulation systems
modal_tarjeta_2.3
Simon develops its products according to specific protection standards in relation to the IP Code described in IEC Standard 60529. Degrees of protection provided by enclosures and the IK Code Described in IEC Standard 62262 (EN 50102). Degrees of protection provided by enclosures for electrical equipment against external impacts.
IP66
Totally dust proof. Protected against strong water projections or against rough seas.
IK08
Protected against 5 Joules of external mechanical impact by an object with a mass of 1.7 Kg from a height of 295 mm.
Protection
IP and IK Protection Degrees
modal_tarjeta_4.2
Body
Injected cast aluminum or repulsed aluminum
Closure system
Stainless steel screws / Cast aluminum levers
Diffuser
Methacrylate or clear glass
Material and Finishes
Materials and color finishes and specific protections
modal_tarjeta_5.2
UNE-EN 60598-1
Luminaires. Part 1: General requirements and tests.
UNE-EN 60598-2-3
Public lighting luminaires. Part 2: corresponds to the specific type of luminaire being studied.
UNE-EN 61000-3-2
Electromagnetic Compatibility (EMC). Part 3-2: Limits. Limits for harmonic current emissions (equipment with input current ≤ 16 A per phase).
UNE-EN 61000-3-3
Electromagnetic Compatibility (EMC). Part 3-3: Limits. Limitation of voltage changes and flicker in public low-voltage supply systems, for equipment with rated current ≤16 A per phase not subject to conditional connection.
UNE-EN 55015
Limitation and methods for measuring characteristics related to the radio-electrical disturbance of electrical lighting and similar equipment.
UNE-EN 61547
General-use lighting equipment. Requirements related to EMC immunity.
UNE-EN 62471:2009
Photo-biological safety of lamps and lamp systems.
UNE-EN 61347-2-13
Lamp control devices. Part 2-13: Specific requirements for electronic control devices powered by a direct or alternating current for LED modules.
UNE-EN 61347-2-13
Dispositivos de control de lámpara. Parte 2-13: Requisitos particulares para dispositivos de control electrónicos alimentados con corriente continua o corriente alterna para módulos LED.
UNE-EN 62471:2009
Photo-biological safety of lamps and lamp systems.
Regulation and Certification
National Regulations and European Directives
modal_tarjeta_7.2
Colour is a lighting characteristic determined by the spectral composition of the light and its interaction with the human eye.
4.000 K
Neutral white light
3.000 K
Warm white light
2.700 K
Soft white light
Colour Temperature
Kelvin scale light color
Key features
Protection grade
Class
Certificates
Weight 16 kg
Color temperatures NDL 4.000 K, WDL 3.000 K, SDL 2.700 K, APC
Color rendering index >70
Upper hemisphere flow <1% (zonas E1)
LED duration (L90 B10 at Ta = 25 ºC and Tj =95 ºC) 100.000h
Photometric distribution (Optics) RG/ RJ/ RA/ RE/ SA/ RF/ RW
Key features
Discover the technical characteristics of this luminaire
