BASIC INFORMATION
Version:
4 pre-punched holes for DCS 85 x 18 mm trunking
Finish:
Metal
Available in:
1 to 3 punched holes 130 x 18 mm and 1 to 4 pre-punched holes 85 x 18 mm (see selection table)
KIT availability:
No
Protection against entry of dust and small objects:
Yes, thanks to the inclusion of protective foam in the base of the distribution plinth.
Packaging contents:
Distribution plinth for floor trunking, protective foam, screws and installation manual
Remarks:
Designed with 4 pre-punched holes for DCS 85 x 18 mm trunking. See table in the event of requiring a different plinth configuration for the distribution of floor trunking. In addition to allowing the distribution and branching of trunking, it facilitates the integration of K45 mini columns on the plinth base, using the adaptor ref. ALKA02/8
TECHNICAL INFORMATION
Dimensions:
140 x 140 mm
Depth:
30 mm
Top cover dimensions:
140 x 140 x 3 mm
Cabling feed in baseboard dimensions:
90 x 90 mm
Heat resistance:
+850ºC (according rule IEC 60695-10-2)
Insulation resistance:
5 MOhms at 500 V.
Dielectric strength:
Without perforation or contournament with 2000 V at 50H during 1 minute
Earthing resistance:
< 0.05 ?
Electrical properties:
With electrical continuity
Screws required for fixing to the floor:
4
IP rating:
4X
RAL:
Does not have
Manufacturing material:
Stainless steel
Type of product:
Standard
Market available:
CE
REGULATIONS
Regulations:
Directive 2014/35/UE LVD + EN 50085-2-2:2008
INSTALLATION AND MAINTENANCE
Installation type:
Suitable for installing on any floor type, whether raised or concrete
Type of fastening:
Using supplied screws
Installation direction:
Horizontal
Temperature range during installation:
-5 to 60º C
Max. temp. during construction work:
+120º C
Maintenance:
Clean with a soft dry cloth.
Do not use tissues and/or abrasive cleaners containing chlorine.