BASIC INFORMATION
Version:
6 elements
Number of modules:
6 modules
Space for cabling distribution:
The bracket is supplied with 1 blind plate for easier internal wiring distribution.
Cabling access:
Through the housings located at the sides of the profile.
Cabling access typology:
Entry for fast-connection connectors, electrical cabling hose, voice, data and multimedia cabling through specific plates.
Linkable:
No
Finish:
Graphite
Available in:
Available in 2, 3, 4, 5, 6, 7, 8, 9 and 10 element versions
Expandable:
No
KIT availability:
No
Possibility of including quick-connect connectors along the side of the housing:
Yes
Compatibility:
Simon K45 range functions and possible to combine with the Simon Electrical Wiring range.
Packaging contents:
Ofiblock Compact aluminium profile, 1 ground connection, 1 blind plate, 1 side cover with direct cable entry, cabling gland, 1 blind side cover, screws and installation manual.
Remarks:
More compact profile to allow convergence of energy, voice, data and multimedia solutions at a lesser depth.
TECHNICAL INFORMATION
Dimensions:
54 x 315 mm
Depth:
54 mm
Heat resistance:
+125ºC (according to standard IEC 60670)
Extinguishing:
+850ºC (according to standard IEC 60670)
Insulation resistance:
>5 MOhm at 500 V
Number of side entrances:
Up to 2 cables for each side of the profile through the ACFC02/24 cover. On request, the side cover can be supplied machined according to the customer's requirements.
Screws required for fixing to the slab:
Two (1 per side) in combination with Art.no. KSF4 (bracket not supplied with the profile)
IP rating:
4X
RAL:
7021
Manufacturing material:
Anodized aluminium bracket and side covers in self-extinguishing thermoplastic insulation and halogen free; guarantees non-propagation of the flame in case of fire and low toxicity in case of smoke.
Type of product:
Standard
Market available:
CE
REGULATIONS
Regulations:
Directive 2014/35/UE LVD + EN 60670-1:2005
INSTALLATION AND MAINTENANCE
Installation type:
Suitable for installation on walls, furniture, raised floors, metal surfaces with a magnet or DIN rails.
Securing possibilities:
Its design allows it to be surface-mounted on the wall, on table-top furniture, under a desk, on a raised floor, a metal surface with magnet, or on a DIN rail using specific fastening accessories.
Type of fastening:
By fastening the bracket chosen and subsequent linking through the rear DIN rail on the profile.
Installation direction:
Vertical and horizontal.
Removal of cover:
Only with tool
Removal of the plate:
Only with tool
Removal of components:
Only with tool
Temperature range during installation:
-5 to 60º C
Max. temp. during construction work:
+60º C
Maintenance:
Clean with a soft dry cloth.
Do not use tissues and/or abrasive cleaners containing chlorine.