BASIC INFORMATION
Series:
Simon K45
Version:
4 elements
Number of modules:
4 modules
Finish:
Grey
Available in:
Versions for 2, 3, 4, 6, 8 and 12 elements
Expandable:
No
KIT availability:
No
Number of cover opening positions:
2
Possibility of including quick-connect connectors along the side of the housing:
No
Protection against entry of dust and small objects:
Yes, thanks to the inclusion of protective foam in the wire outlet
Compatibility:
With Simon K45 mechanisms (no adaptor required)
Packaging contents:
Floor box, metal partition wall, ground connection cable, screws and installation manual
Remarks:
To complete the installation of the product it must be combined with a plastic tray (Art. No. 52052102-035) once configured. Alternatively, it may be combined with flush-mount trim cover (Art. No. 52053102-035) in cases where the same floor finish is not installed.
TECHNICAL INFORMATION
Dimensions:
171 x 187 mm
Depth:
76 mm
Maximum load:
1,400 kilograms
Depth of adjustment range:
Entre 76 y 100 mm
Free space in inner box with minimum adjustment:
13 mm
Free space in inner box with maximum adjustment:
38 mm
Claw range of operation:
Between 14 and 54 mm
Elevation of frame from ground level:
3,2 mm
Flip-up cover dimensions:
145 x 161 x 15 mm
Personalisation of flush-mount cover dimensions:
107 x 154 x 8 mm
Heat resistance:
+125 °C (in accordance with standard IEC 60695-10-2)
Extinguishing:
+850 °C / 30 seconds (GWFI in accordance with standard IEC 60695-2-11)
Insulation resistance:
>5 MΩ a 500 V
Dielectric strength:
No holes or contours, with 2000V at 50 Hz for 1 minute
Number of side entrances:
8
No. of pre-punched holes Ø20 mm:
4
No. of pre-punched holes Ø26 mm:
4
Number of clamp-holder holes:
4
Electromagnetic immunity for VDM wiring:
Secured by installing the metal partition wall supplied with the box into the housings fitted for this purpose.
IP rating:
4X
IK Classification:
8
RAL:
7011
Manufacturing material:
Metal components with self-extinguishing, halogen-free thermoplastic insulation that guarantees there is no flame propagation in case of fire and low toxicity in case of smoke emission.
Type of product:
Standard
Market available:
CE
REGULATIONS
Regulations:
2006/95/CE Directive + UNE-EN 60,670
INSTALLATION AND MAINTENANCE
Installation type:
Especially designed to be installed in concrete floors, although it is also suitable for installation in raised floors
Type of fastening:
Using the floor box's fastening claws in the concrete floor tray (supplied with the floor box)
Installation direction:
Horizontal
Can be installed in tray:
Plastic
Removal of cover:
Only with tool
Removal of the frame:
Only with tool
Removal of components:
Only with tool
Recess dimension:
170 x 155 mm
Tray flush mount dimension:
220 x 172.2 mm
Temperature range during installation:
-5 a +60º C
Max. temp. during construction work:
+90º C
Maintenance:
Clean with a soft, dry cloth.
Do not use abrasive cloths or cleaning products that contain chlorine.
