Image
Image
This image represents the combined solution of different references

This image represents the combined solution of different references

Image
Image
Image
This image represents the combined solution of different references

This image represents the combined solution of different references

Image
Ref
KF270/14

Adjustable floor box with 2 elements for installation in Simon K45 graphite concrete floor

Price/Unit
Price on request
Packaging quantity
1 Unit

Available downloads

Technical specifications
KF270_14-datasheet-en.pdf
Installation manual

  1. 990820.pdf [3MB]

Product declaration

  1. UES0051.pdf [683KB]

Do you need advice?
Outstanding Features
Series
Simon Cima
Series Compatibility

Simon Cima

Product Information
Downloads
Support

Adjustable floor box for concrete floor installation for two elements, finished in graphite, part of the Simon K45 collection. The Simon K45 adjustable floor box meets the needs of every room, as it is suitable for installation in both concrete and raised floors, since its depth can be adjusted from 70 to 100mm for concrete floors and 90 to 120 mm for raised floors. It is manufactured from halogen-free thermoplastic materials, impeding the propagation of flames in case of fire, allowing a maximum temperature of 90 °C. For a complete installation, it must be combined with a plastic tray (Art. No. 52052101-035). With dimensions of 132 x 187 x 76 mm and a graphite finish, the Simon K45 collection floor box is synonymous with quality, style and innovation, appropriate for any type of space, whether it's a room or office.

Basic information

  • Compatibility

    With Simon K45 mechanisms (no adaptor required)

  • Remarks

    To complete the installation of the product it must be combined with a plastic tray (Art. No. 52052101-035) once configured. Alternatively, it may be combined with flush-mount trim cover (Art. No. 52053101-038) in cases where the same floor finish is not installed.

  • Finish

    Graphite

  • Material

    Various

  • Packaging contents

    Floor box, metal partition wall, ground connection cable, screws and installation manual

Technical information

  • Market available

    CE

  • IK Classification

    8

  • Number of clamp-holder holes

    2

  • Number of pre-punched holes Ø12_5 mm

    2

  • Number of pre-punched holes Ø20 mm

    2

  • Number of pre-punched holes Ø26 mm

    2

  • RAL

    7021

  • Available in

    2, 4, 6, 8 and 12 elements

  • Dielectric strength

    No holes or contours, with 2000V at 50 Hz for 1 minute

  • Electromagnetic immunity for VDM wiring

    Secured by installing the metal partition wall supplied with the box into the housings fitted for this purpose.

  • Heat resistance (ºC)

    +125 °C (in accordance with standard IEC 60695-10-2)

  • Insulation resistance (V-MΩ)

    >5 MΩ a 500 V

  • IP Rating

    IP4X

  • Max temp during construction work (ºC)

    +90º C

  • Maximum load (kg)

    800kg

  • Number of side entrances

    6

  • Protection against entry of dust and small objects

    Yes, thanks to the inclusion of protective foam in the wire outlet

  • Recess dimension (mm)

    170 x 115 mm

  • Temperature range during installation (ºC)

    -5 a +60º C

  • Version

    2 elements

  • Depth (mm)

    76

  • Depth of adjustment range (mm)

    76 mm - 100 mm

  • Dimensions (mm)

    132 x 187

  • Elevation of frame from ground level (mm)

    3.2

  • Flip-up cover dimensions (mm)

    105 x 161 x 15 mm

  • Free space in inner box with maximum adjustment (mm)

    38

  • Free space in inner box with minimum adjustment (mm)

    13

  • Tray flush mount dimension (mm)

    220 x 172.2 mm

Installation and maintenance

  • Number of cover opening positions

    2

  • Personalisation of flush-mount cover dimensions (mm)

    66 x 154 x 8 mm

  • Can be installed in tray

    Plástica

  • Claw range of operation (mm)

    Between 14 and 54 mm

  • Extinguishing (ºC)

    +850 ºC / 30 seconds (GWFI in accordance with standard IEC 60695-2-11)

  • Installation direction

    Horizontal

  • Installation type

    Especially designed to be installed in concrete floors, although it is also suitable for installation in raised floors

  • Removal of components

    Only with tool

  • Removal of cover

    Only with tool

  • Removal of the frame

    Only with tool

  • Type of fastening

    Using the floor box's fastening claws in the concrete floor tray (supplied with the floor box)

  • Maintenance

    Clean with a soft, dry cloth. Do not use abrasive cloths or cleaning products that contain chlorine.

Regulation

  • Regulations

    2006/95/CE Directive + UNE-EN 60,670

Logistics Information

  • Product net weight

    0.61KGM

  • Product gross weight

    0.61KGM

  • Packaging quantity

    1

  • Packaging height

    95MMT

  • Packaging width

    155MMT

  • Packaging length

    195MMT

  • Packaging volume

    2.871MMQ

  • Packaging net weight

    0.61KGM

  • Packaging gross weight

    0.61KGM

  • Packaging EAN

    8421053125373

Do you need advice?

If you need to contact us, please click here to send us a message and we will respond as soon as possible.

Contact us