BASIC INFORMATION
Version:
4 elements
Number of modules:
2 half-elements
Finish:
Grey
Available in:
4, 6 and 8 elements
Expandable:
No
KIT availability:
No
Number of cover opening positions:
2
Possibility of including quick-connect connectors along the side of the housing:
No
Protection against entry of dust and small objects:
Yes, thanks to the inclusion of ductile plastic wire outputs
Compatibility:
Simon K45 functions
Packaging contents:
Floor box and installation manual
Remarks:
To complete the installation of the product on concrete flooring, it must be combined with the plastic tray (ref. G201). If not installing the same floor finish, it may be combined with the flush-mount trim cover. (ref. 52053202-035)
TECHNICAL INFORMATION
Dimensions:
252 x 180 mm
Depth:
65 mm
Maximum load:
400 kg
Depth of adjustment range:
51 to 89.5 mm (using concrete floor tray ref. G201)
Claw range of operation:
Between 11 and 48 mm
Elevation of frame from ground level:
3.2 mm
Flip-up cover dimensions:
240 x 170 x 10 mm
Personalisation of flush-mount cover dimensions:
210 x 130 x 5.5 mm
Heat resistance:
+125ºC (according rule IEC 60695-10-2)
Extinguishing:
+850ºC / 30 seconds (GWFI according rule IEC 60695-2-11)
Insulation resistance:
>5 MOhm at 500 V
Dielectric strength:
Without perforation or contournament with 2000 V at 50H during 1 minute
Number of side entrances:
4
No. of pre-punched holes Ø10 mm:
4
No. of pre-punched holes 55 x 20 mm:
4
Number of clamp-holder holes:
4
IP rating:
4X
IK Classification:
8
RAL:
7011
Manufacturing material:
Metallic components with autoextingible thermoplastic isulation and halogen free; guarantees the no-propagation of the flame in case of fire and the low toxicity in case of smoke
Type of product:
Standard
Market available:
CE
REGULATIONS
Regulations:
Directive 2014/35/UE LVD + EN 60670-23:2008
INSTALLATION AND MAINTENANCE
Installation type:
Its design for shallow floors allows it to be installed on any type of raised or concrete floor, and by combining the latter type of installation with tray ref. G201
Type of fastening:
By fastening claws to the concrete floor tray or the raised floor tile (supplied with the floor box)
Installation direction:
Horizontal and vertical, according to the installation of the floor tray or the hole cut into the raised floor tile
Can be installed in tray:
Plastic
Removal of the frame:
Only with tool
Removal of components:
Only with tool
Recess dimension:
250 x 178 mm
Tray flush mount dimension:
272 x 343 mm
Temperature range during installation:
-5 to 60º C
Max. temp. during construction work:
+90º C
Maintenance:
Clean with a soft dry cloth.
Do not use tissues and/or abrasive cleaners containing chlorine.
