Simon | K45

The Teleblock K45 comes with one wide blind plate, two narrow blind plates, a metal divider plate, an insertion ring (push-pull or gas cylinder), a fixing thread and all the necessary screws. (The cover and the trim frame are supplied separately).

Also available with manual lifting system

Once connected and closed, it integrates perfectly into the furniture, concealing the connections and serving as a cable grommet.

• On the talbe
• Under the table
• Raised floor
• Wall mural
• Mural on a partition or furniture
• Metal surface with magnet
• DIN rail

Every Ofiblock Plus K45 is supplied with the aluminium bracket, frame holders, screws, a metal divider, two ground connections and two blind plates (for the front and side).

Installation of socket outlets with indicator light under the floor for easy location of the connection points. Ideal for low raised floors.

Every Ofiblock Compact K45 is supplied with an aluminium bracket, a blind side cover, a side cover for direct cable entry, screws and a blind front cover to facilitate internal cable routing.

Optional side covers for quick connection inlets.

Quick and easy installation by direct clipping to Simon K45 solutions.

Rear cable inlets allow installation in any piece of furniture that is at least 10 mm wide.

The bracket fits into the frame from the back and stays securely in place thanks to the four locking tabs.

Frame with straight lines and minimalist aesthetic that integrates into any piece of furniture.

The Simon K45 dual-surface box comes with a divider plate, fixing plugs and all the necessary screws.

Specially designed for installing FTP and higher category connectors, where depth and radius are critical.

The necessary depth is achieved by installing a flush-mount junction box and a surface box.

The SCM21F/9 and SCM31F/9 accessories allow access via 20x30 and20x50 mm mini trunking.

The IP66 rating keeps the solutions fully isolated from knocks and external elements like dust, liquids and humidity.

Raised floor.

Concrete.

For installation in garden and terrace raised flooring, wood flooring, parquet, etc.

Allows flush-mount installation of the box in all types of pavement (porcelain stoneware, terrazzo, ceramic, etc.).

Security lock.

Perfect for restricting access to connections in public spaces

Manual closure.

Suitable for less demanding environments.

Compatible with every function in the range: electrical socket outlets, protective elements, plates for V&D and multimedia.

The lockable protective cover restricts access to the connections and ensures that the cabling is routed to the electrical devices (vending machines, printers, etc.).

Individual frame holders that clip onto the bracket and, using linkable parts, can formed into blocks, separating the electrical components from the voice and data components.

Allen stainless steel screws are used for security (requiring a specific wrench to disassemble it), and its design is perfectly flush with the structure.

The enclosures are 57 mm deep, to accommodate the bending radius and to facilitate cable routing during installation.

Simplicity

• 1 side

Compact:

• 1 side for VDM

• 1 side for electrical sockets outlets (ref. K01/..)

For 4 workstations

Maximun capacity

•  4 sides

For 2 workstations

Design

•  2 sides

•  Oval shape

The Simon K45 mini columns are installed directly on the floor using the attachment feet and are powered through cabling flush-mounted into the floor or under the raised flooring.

With a single item number, the Simon K45 mini column is supplied with everything needed for its installation: the foot for attaching it to the floor, a top cover, side panels and other miscellaneous materials.

The ALKA02/8 adaptor allows the Simon K45 mini-columns to be installed in the floor trunking baseboard and powered via 85x18 and 130x18 mm floor trunking.

The column is attached by pressing it against the ceiling, instead of having to screw it into the flooring.

This method allows the layout of workstations to be changed easily.

There are four bracket types with a different number of connection sides, allowing many solutions to be grouped together

With a single item number, the Simon K45 columns are supplied with everything needed to install them: the foot for attaching it to the floor, the ceiling trim, a telescopic assembly for attaching it to the ceiling, the aluminium covers and other miscellaneous materials.

Push-button switch with indicator light that helps it to be located in the dark.

2-way switch with pilot light that indicates whether the switch is on or not.

Disconnect the two poles from a load or circuit while minimising any problems due to small leaks that may occur, in fluorescent bulbs, for example, when using a single-pole switch.

Allows the vertical positioning of switching mechanisms. Specially designed for installation in vertical enclosures (mini columns, columns, teleblocks, trunking, etc.).

The AC11 linking accessory allows the direct linking of quick connection socket outlets without having to wire them manually.

All socket outlets have a protective shutter to prevent direct contact with the live parts.

Protects the UPS line, allowing only computer equipment to be connected.

Red finish.

For connecting computer equipment via uninterruptible power supply.

Orange finish.

Specifically for powering servers or laboratory devices.

Green finish.

For the healthcare sector.

Plug holes set at 45º to prevent any interference that might be caused by using elbowed plugs in a group of electrical socket outlets.

Compatible with rigid and flexible 2.5 mm2 cable.

Compatible with rigid and flexible 2.5 mm2 cable.

Angled plates are perfect when using large connectors. They maintain the ideal bending radius, thus ensuring high-speed data transmission.

Plates with dust shutters that close automatically, helping to keep the contacts in the voice and data connector clean and ensuring optimum connection.

Space for writing or placing a label with the workstation number.

The RJ11 and RJ12 patch cords can also be combined with female RJ45 connectors.

Clipping sequence for MD modules in angled plates.

The flat plates are designed to fully integrate into the enclosures.

Simon’s philosophy is to integrate existing connectors in the market into our enclosures.

The K45 format protective elements can be installed in a wide variety of K45 enclosures. Thanks to their high 10-mA sensitivity, they are recommended for training centres, schools and nurseries.

The DIN K45 format protective elements are designed to be installed in Ofiblocks, mechanism holder channels, mini-columns and K45 columns.

1. 1. Clip the DIN rail to the RCB or RCCB switch.
2. Clip the assembly to the enclosure or to the mechanism holder.
3. Install the trim plate.

For grouping audiovisual equipment.

Faster and easier internal connection system.

No welding or screw connections required.