BASIC INFORMATION
Version:
4-sided
Number of modules:
200 wide modules (50 per side)
Finish:
Metal
Available in:
1-sided, 2-sided (square and oval) and 4-sided
KIT availability:
No
Compatibility:
Simon K45 functions
Packaging contents:
Column, floor attachment base, front covers, ceiling trim, telescopic assembly for fixing to the ceiling slab, screws and installation manual
Remarks:
Column designed to be combined with screw-in socket outlets on the two narrower sides of the mini-column. The remaining sides do not have any function restrictions. The column is supplied with a 0.5-metre telescopic guide for press-fit fixing to the floor slab, without the need for threading, allowing the maximum fixing height of the column to be extended up to 3.5 metres (without extension).
TECHNICAL INFORMATION
Dimensions:
3000 x 125 mm
Depth:
125 mm
Telescopic guide adjustment range:
Between 0 and 500 mm
Maximum length of column:
4500 mm (the column can be a maximum length of 5,000 mm, combining it with a 1,500 mm extension, and extending the telescopic assembly for fixing to the ceiling slab to its maximum extension)
Front cover dimensions:
3000 x 45 mm
Top cover dimensions:
170 x 170 x 10 mm
Cabling feed in baseboard dimensions:
100 x 100 mm
Heat resistance:
+650ºC (according rule IEC 60695-10-2)
Insulation resistance:
5 MOhms at 500 V.
Dielectric strength:
Without perforation or contournament with 2000 V at 50H during 1 minute
Earthing resistance:
< 0.05 ?
Electrical properties:
With electrical continuity
Electromagnetic immunity for VDM wiring:
Separation by means of the column compartments themselves to eliminate any possible electromagnetic interference and transmission errors between the electric cables and Voice, Data and Multimedia cables.
IP rating:
4X
RAL:
Does not have
Manufacturing material:
Anodised aluminium
Type of product:
Standard
Market available:
CE
INSTALLATION AND MAINTENANCE
Type of fastening:
By press-fitting the telescopic guide into the ceiling slab (no screws are required for fastening)
Installation direction:
Vertical
Removal of cover:
Only with tool
Removal of components:
Only with tool
Temperature range during installation:
-25 a 120º C
Max. temp. during construction work:
+120º C
Maintenance:
Clean with a soft dry cloth.
Do not use tissues and/or abrasive cleaners containing chlorine.
