BASIC INFORMATION
Series:
Simon 500 Cima
Version:
4 elements
Number of modules:
4 modules
Finish:
Grey
Available in:
4, 6 and 8 elements
Expandable:
No
KIT availability:
Yes
Number of cover opening positions:
2
Possibility of including quick-connect connectors along the side of the housing:
No
Protection against entry of dust and small objects:
Yes, thanks to the inclusion of ductile plastic wire outputs
Compatibility:
Simon 500 Cima and Simon 27 Play/Simon K45 mechanisms (using a specific adaptor)
Packaging contents:
Floor box and installation manual
Remarks:
To complete the installation of the product in concrete floors, once configured, it must be combined with a plastic tray (ref.G201). Alternatively, it may be combined with flush-mount trim cover (ref.52053202-035) in cases where the same floor lining is not installed.
TECHNICAL INFORMATION
Dimensions:
252 x 180 mm
Depth:
69 mm
Claw range of operation:
Between 11 and 48 mm
Elevation of frame from ground level:
3.2 mm
Flip-up cover dimensions:
240 x 170 x 10 mm
Personalisation of flush-mount cover dimensions:
210 x 130 x 5.5 mm
Heat resistance:
+125 ºC (in accordance with standard IEC 60695-10-2)
Extinguishing:
+850 ºC / 30 seconds (GWFI in accordance with standard IEC 60695-2-11)
Insulation resistance:
>5 MOhms at 500V
Dielectric strength:
No holes or contours, with 2000V at 50 Hz for 1 minute
Number of side entrances:
4
No. of pre-punched holes Ø10 mm:
4
No. of pre-punched holes 55 x 20 mm:
4
Number of clamp-holder holes:
4
IP rating:
4X
IK Classification:
8
RAL:
7011
Manufacturing material:
Metal components with self-extinguishing, halogen-free thermoplastic insulation that guarantees no flame propagation in case of fire and low toxicity in case of smoke emission.
Type of product:
Standard
Market available:
CE
REGULATIONS
Regulations:
Directive 2014/35/UE LVD + EN 60670-23:2008
INSTALLATION AND MAINTENANCE
Installation type:
Its design for shallow floors allows it to be installed in any type of raised or concrete floor, combining the latter installation type with tray ref. G201
Type of fastening:
Using fastening claws on the concrete floor tray or on the raised floor tile (supplied with the floor box)
Installation direction:
Horizontal and vertical, according to the installation of the floor tray or the hole cut into the raised floor tile
Can be installed in tray:
Plastic
Removal of components:
Only with tool
Recess dimension:
250 x 178 mm
Tray flush mount dimension:
272 x 343 mm
Temperature range during installation:
-5 to 60 ºC
Max. temp. during construction work:
+90 ºC
Maintenance:
Clean with a soft, dry cloth.
Do not use abrasive cloths or cleaning products that contain chlorine.
