Learn everything you need to know to prescribe, install and configure the Simon iO ecosystem.
Mechanisms
Simon 500 Cima
The floor box of the range of Simon 500 Cima in a beautiful grey colour, it is specially designed to be installed in raised floor and to provide power to a total of eight elements. The raised floor is characterized by find him to the power on the concrete floor, which makes it possible to perform various facilities.
In this sense, the floor box is installed in a very simple way by recessing. If you want to integrate the product completely on the floor and bet on its discretion in the room where it is, you can choose to combine this box with a trim cover (ref.52053104-038).
The floor box Simon 500 Cima has dimensions of 187 x 283 millimetres and 92 millimetres of depth and is made of thermoplastic material which has the added value of being able to do not propagate the flame in case of fire and reduce the toxicity of smoke. To all this is added to the material is fully halogen-free.
Compatibility
Simon 500 Cima and Simon 27 Play/Simon K45 mechanisms (using a specific adaptor)
Remarks
Once the product has been configured and installed, as an option, it may be combined with flush-mount trim cover (ref.52053104-038) in cases where the same floor lining is not installed.
Finish
Graphite
Material
Plastic
Packaging contents
Floor box, metal partition wall, ground connection cable, screws and installation manual
Market available
CE
IK Classification
8
Number of clamp-holder holes
12
Number of pre-punched holes Ø20 mm
5
Number of pre-punched holes Ø26 mm
5
RAL
7021
Available in
2, 4, 6, 8 and 12 elements
Dielectric strength
No holes or contours, with 2000V at 50 Hz for 1 minute
Electromagnetic immunity for VDM wiring
Secured by installing the metal partition wall in the housings fitted into the box for this purpose.
Heat resistance (ºC)
+125ºC (according rule IEC 60695-10-2)
Insulation resistance (V-MΩ)
>5 MOhms at 500V
IP Rating
IP4X
Max temp during construction work (ºC)
+90 ºC
Maximum load (kg)
1 300 quilos
Number of side entrances
10
Protection against entry of dust and small objects
Yes, thanks to the inclusion of protective foam
Recess dimension (mm)
170 x 265 mm
Temperature range during installation (ºC)
-5 to 60 ºC
Version
8 elements
Depth (mm)
92 mm
Depth of adjustment range (mm)
Entre 92 e 120 mm
Dimensions (mm)
187 x 283 x 92
Elevation of frame from ground level (mm)
3,2 mm
Flip-up cover dimensions (mm)
160 x 256 x 15 mm
Free space in inner box with maximum adjustment (mm)
57 mm
Free space in inner box with minimum adjustment (mm)
29 mm
Number of cover opening positions
2
Personalisation of flush-mount cover dimensions (mm)
118 x 247 x 8 mm
Claw range of operation (mm)
Between 14 and 54 mm
Extinguishing (ºC)
+850 ºC / 30 seconds (GWFI in accordance with standard IEC 60695-2-11)
Installation direction
Horizontal and vertical, corresponding to the hole cut into the raised floor tile
Installation type
Especially designed to be installed in raised floors
Removal of components
Only with tool
Removal of the frame
Only with tool
Removal of the plate
Only with tool
Type of fastening
Using fastening claws on the raised floor tile (supplied with the floor box)
Maintenance
Clean with a soft, dry cloth. Do not use abrasive cloths or cleaning products that contain chlorine.
Regulations
Directive 2014/35/UE LVD + EN 60670-23:2008
Product net weight
1.61 KGM
Product gross weight
1.61 KGM
Product EAN
8421053093009
Packaging quantity
1
Packaging height
95 MMT
Packaging width
186 MMT
Packaging length
282 MMT
Packaging volume
4982940 MMQ
Packaging net weight
1.61 KGM
Packaging EAN
8421053093009
¿Do you need advice?
If you need to contact us, click to send us a message and we will respond as soon as possible.