BASIC INFORMATION
Series:
Simon 500 Cima
Version:
6 elements
Number of modules:
6 modules
Finish:
Grey
Available in:
2, 4, 6, 8 and 12 elements
Expandable:
No
KIT availability:
Yes
Number of cover opening positions:
2
Possibility of including quick-connect connectors along the side of the housing:
No
Protection against entry of dust and small objects:
Yes, thanks to the inclusion of protective foam
Compatibility:
Simon 500 Cima and Simon 27 Play/Simon K45 mechanisms (using a specific adaptor)
Packaging contents:
Floor box, metal partition wall, ground connection cable, screws and installation manual
Remarks:
To complete the installation of the product, once configured, it must be combined with a plastic tray (ref.52052103-035). Alternatively, it may be combined with flush-mount trim cover (ref.52053103-035) in cases where the same floor lining is not installed.
TECHNICAL INFORMATION
Dimensions:
226 x 187 mm
Depth:
76 mm
Maximum load:
1,700 kilograms
Depth of adjustment range:
Between 76 and 100 mm
Free space in inner box with minimum adjustment:
13 mm
Free space in inner box with maximum adjustment:
38 mm
Claw range of operation:
Between 14 and 54 mm
Elevation of frame from ground level:
3.2 mm
Flip-up cover dimensions:
199 x 160 x 15 mm
Personalisation of flush-mount cover dimensions:
160 x 154 x 8 mm
Heat resistance:
+125 ºC (in accordance with standard IEC 60695-10-2)
Extinguishing :
+850 ºC / 30 seconds (GWFI in accordance with standard IEC 60695-2-11)
Insulation resistance:
>5 MOhms at 500V
Dielectric strength:
No holes or contours, with 2000V at 50 Hz for 1 minute
Number of side entrances:
12
No. of pre-punched holes Ø12.5 mm:
8
No. of pre-punched holes Ø26 mm:
2
Number of clamp-holder holes:
8
Electromagnetic immunity for VDM wiring:
Secured by installing the metal partition wall in the housings fitted into the box for this purpose.
IP rating:
4X
IK Classification:
8
RAL:
7011
Manufacturing material:
Metal components with self-extinguishing, halogen-free thermoplastic insulation that guarantees no flame propagation in case of fire and low toxicity in case of smoke emission.
Type of product:
Standard
Market available:
CE
REGULATIONS
Regulations:
Directive 2014/35/UE LVD + EN 60670-23:2008
INSTALLATION AND MAINTENANCE
Installation type:
Especially designed to be installed in concrete floors, although it is also suitable for installation in raised floors
Type of fastening:
Using fastening claws on the concrete tray (supplied with the floor box)
Installation direction:
Horizontal and vertical, depending on the installation of the floor tray
Can be installed in tray:
Plastic and metal
Removal of the frame:
Only with tool
Removal of components:
Only with tool
Recess dimension:
170 x 210 mm
Tray flush mount dimension:
220 x 227 mm plastic tray and 363 x 363 mm metal tray
Lining flush mount dimension:
168 x 206 mm if a metal tray is used
Temperature range during installation:
-5 to 60 ºC
Max. temp. during construction work:
+90 ºC
Maintenance:
Clean with a soft, dry cloth.
Do not use abrasive cloths or cleaning products that contain chlorine.
