BASIC INFORMATION
Series:
Simon 500 Cima
Version:
8 elements
Number of modules:
8 modules
Intensity:
16 A
Voltage:
250 V~
Number of sockets:
3 double sockets: 2 double sockets for standard current circuit and 1 double socket for stable current circuit
Format:
Schuko
Type of terminal connection:
1 click connection (1 click®)
Number of terminals:
3 inputs and 3 outputs
Number of connections per terminal:
1 terminal connection for click terminal connection system and 2 terminal connections for the fast terminal connection system
Type of mechanism:
Insertion
Indicator function:
Yes
Linkable:
Yes, the sockets for a single circuit are supplied linked together.
Number of plates:
2 voice and data plates
Plate type:
Flat
Snap-fit type:
3M
Number of connectors:
4
Compatible with connectors:
3M© Volition OCK, RJ25, K5e and K6
Dust shutter:
No
RJ45 adaptor module:
Included in voice and data plates
RJ45 connectors:
Not included
Finish:
Grey
Expandable:
No
Kit configuration:
2 linked double electrical sockets for standard current and 1 double electrical socket for stable current (UPS) German format and voice and data plates for 4 RJ45 connectors (RJ45 connectors not included)
Number of cover opening positions:
2
Possibility of including quick-connect connectors along the side of the housing:
No
Protection against entry of dust and small objects:
Yes, thanks to the inclusion of ductile plastic wire outputs
Compatibility:
Simon 500 CIMA mechanisms
Packaging contents:
Kit and installation manual
Remarks:
To complete the installation of the product in concrete floors, once configured, it must be combined with a plastic tray (ref.G401). Alternatively, it may be combined with flush-mount trim cover (ref.52053204-035) in cases where the same floor lining is not installed.
TECHNICAL INFORMATION
Dimensions:
329 x 252 mm
Depth:
69 mm
Claw range of operation:
Between 11 and 48 mm
Elevation of frame from ground level:
3.2 mm
Flip-up cover dimensions:
318 x 240 x 10 mm
Personalisation of flush-mount cover dimensions:
277 x 209 x 5.5 mm
Cable section admitted:
From 1.5 to 2.5 mm
Cable stripping necessary:
Not necessary
LED consumption indicator:
0.55 mA
Heat resistance:
+125 ºC (in accordance with standard IEC 60695-10-2)
Extinguishing:
+850 ºC / 30 seconds (GWFI in accordance with standard IEC 60695-2-11)
Insulation resistance:
>5 MOhms at 500V
Dielectric strength:
No holes or contours, with 2000V at 50 Hz for 1 minute
Number of side entrances:
8
No. of pre-punched holes Ø10 mm:
8
No. of pre-punched holes 55 x 20 mm:
8
Number of clamp-holder holes:
8
IP rating:
4X
IK Classification:
8
RAL:
7011
Manufacturing material:
Metal components with self-extinguishing, halogen-free thermoplastic insulation that guarantees no flame propagation in case of fire and low toxicity in case of smoke emission.
Type of product:
Standard
Market available:
CE
REGULATIONS
Regulations:
UNE-EN 60.670-23
INSTALLATION AND MAINTENANCE
Installation type:
Its design for shallow floors allows it to be installed in any type of raised or concrete floor, combining the latter installation type with tray ref. G401
Type of fastening:
Using fastening claws on the concrete floor tray or on the raised floor tile (supplied with the floor box)
Installation direction:
Horizontal and vertical
Can be installed in tray:
Plastic
Removal of the socket:
Only with tool
Removal of the plate:
Only with tool
Recess dimension:
250 x 327 mm
Tray flush mount dimension:
419 x 384 mm
Temperature range during installation:
-5 to 60 ºC
Max. temp. during construction work:
+90 ºC
Maintenance:
Clean with a soft, dry cloth.
Do not use abrasive cloths or cleaning products that contain chlorine.
