The Simon 75 Series stands out for its light control and regulation mechanisms. One of the most sought-after is the Presence Detector with a coverage angle of 180º, which has a range of approximately nine meters and a disconnection timer of between 4 and 10 seconds. Its installation is done with screw terminal connection and should not be installed with lighted push buttons. The simplicity of its operation, without compromising an innovative design, makes it one of the leaders in suitable flush-mounted installations in its sector. A series of electronic components made from halogen-free thermoplastic insulation of the highest quality have been used for its manufacturing. Suitable for the following loads: incandescent and halogen 2600W, halogen with electromagnetic transformer 650 VA, halogen with electronic transformer 550 VA, fluorescence 520 VA, small motors 3 A, and Dulux lamps 100W (max. 4 lamps).
PRESENCE DETECTOR 180º: Wide coverage with a 180-degree detection angle and an approximate range of 9 meters for efficient lighting control.
AUTOMATIC ON BY MOVEMENT: Activates lighting upon detecting presence, optimizing energy savings in homes and professional spaces.
ADJUSTABLE TIMING AND BRIGHTNESS: Disconnect timing adjustable between 4 seconds and 10 minutes, with a light threshold configurable from 0 to 1000 lux.
COMPATIBLE WITH MULTIPLE LOADS: Suitable for incandescent and halogen lamps up to 2600 W, fluorescent up to 520 VA, electronic transformers, and small motors.
MANUFACTURED ACCORDING TO EN 60669-2-1: Electronic components with halogen-free thermoplastic insulation that ensure safety and compliance with European regulations.