Simplified maintenance
Maintenance through dismantling of the upper light group.
)
Simon Kuma
High-efficiency urban lighting
Complete Simon KUMA Istanium LED light point, with light group made of injected aluminium casting. Luminous flux from 1,760 lm. Efficacy up to 136 lm/W.
)
)
)
)
Features
Maintenance through dismantling of the upper light group, facilitating high-altitude operations without intervening on the complete luminaire assembly.
)
)
)
)
)
Versatility for any urban environment
Street, pedestrian street, parks and gardens, plaza and commercial area. Simon Kuma adapts to the diversity of urban projects with a wide range of optics and configurations.
Lighting distributions
)
RG Optics
Discover other Simon indoor lighting series
)
)
Technical specifications
2N- with dimming without control line; self-regulation
The luminaire's electronic driver has a programmed timer that reduces power by half after 4.5 h from switch-on.
2N+ control-line dimming
The electronic driver has an input connected to the electrical cabinet. When the cabinet activates the voltage on the control line, the driver delivers 100% of the nominal power to the Istanium LED module. When the cabinet disconnects the control line (0 volts), the driver reduces power by half.
CAD headline flux dimming
The luminaire's electronic driver adjusts the supply current of the Istanium LED modules proportionally to the input voltage of the line. The headline electrical cabinet must have a device that regulates the line voltage to reduce the luminaire's light level. This type of dimming is ideal for making use of installations with cabinet equipment already installed.
1N without dimming
The electronic driver delivers 100% of the power with no option to be dimmed. If there is any fluctuation in the line voltage, the driver compensates the supply current of the Istanium LED modules to maintain the luminous flux (input voltage from 208 to 277 Vac). Likewise, if the electrical cabinet has a headline flux dimming equipment, the driver will not dim the lamp (an Istanium LED luminaire with CAD dimming is required).
1-10 dimming governed by 1-10V protocol
The electronic driver delivers the output power to the Istanium LED modules according to the level indicated by the 1-10 signal (usually delivered by a remote management device)
DALI dimming governed by DALI protocol
The electronic driver delivers the output power to the Istanium LED modules according to the level indicated by the DALI signal (usually delivered by a remote management device)
MORE INFORMATION
Looking for something more specific?
To go further