Classic decorative design
Classic decorative luminaire with conical cover, trim ring and BKTECH black finish.
)
Simon Praga M Basic
Classic design
Classic decorative urban Simon PRAGA Istanium LED luminaire, M size, BASIC model, made of injection-cast aluminium with post-top fixing. A classic-design lighting proposal aimed at replacing installed stock of the same fixture equipped with HID.
)
)
)
Features
One-piece light unit including breather valve and flux-recovering truncated pyramidal reflector.
)
)
)
)
Road application: RJ and RE optics
On a single-lane street with two sidewalks we project RE-type road optic, extensive road, according to spacing and luminaire height. On A+2C+A public roads we use RJ-type frontal road optic, achieving sidewalk levels of around 15 lux and roadway levels exceeding 18 lux.
Lighting distributions
)
RG Optics
Discover other Simon indoor lighting series
)
)
Technical specifications
2N- with dimming without control line; self-regulation
The luminaire's electronic driver has a programmed timer that reduces power by half after 4.5 h from switch-on.
2N+ dimming via control line
The electronic driver has an input connected to the electrical cabinet. When the cabinet activates the voltage on the control line, the driver delivers 100% of the nominal power to the Istanium LED module. When the cabinet disconnects the control line (0 volts), the driver reduces power by half.
CAD dimming via headline flux
The luminaire's electronic driver adjusts the supply current of the Istanium LED modules proportionally to the input voltage of the line. The headline electrical cabinet must have equipment that regulates the line voltage to reduce the luminaire's light level. This type of dimming is ideal for making use of installations with cabinet equipment already installed.
1N without dimming
The electronic driver delivers 100% of the power with no option to be dimmed. If there is any fluctuation in the line voltage, the driver compensates the supply current of the Istanium LED modules to maintain the luminous flux (input voltage from 208 to 277 Vac). Likewise, if the electrical cabinet has a headline flux dimming equipment, the driver will not dim the lamp (an Istanium LED luminaire with CAD dimming is required).
1-10 dimming governed by 1-10V protocol
The electronic driver delivers the output power to the Istanium LED modules according to the level indicated by the 1-10 signal (usually delivered by a remote management device)
DALI dimming governed by DALI protocol
The electronic driver delivers the output power to the Istanium LED modules according to the level indicated by the DALI signal (usually delivered by a remote management device)
MORE INFORMATION
Looking for something more specific?
To go further