)
Simon Alya
Simon Alya Istanium LED decorative urban luminaire in die-cast aluminium, for lateral or suspended fixing. Light flux from 1,760 lm and efficiency up to 138 lm/W. Hemispherical design with a high-efficiency internal cooling system. Suitable for avenues, streets, commercial areas, parks and squares.
)
Minimalist design of hemispherical shapes with internal cooling system by means of fins not visible from the installed position. Guarantees the life of the LED and its optimum performance at high power currents. Lateral or suspended fixation by means of a threaded adapter that allows the adjustment of fixings from Ø34 mm to Ø76 mm.
)
)
)
Minimal design of hemispherical shapes. Internal cooling system by means of fins not visible from the installed position. Guarantees the life of the LED and its optimum performance at high power currents. It allows to extend the performance of the LEDs and therefore the life of the luminaire.
)
)
Simon's configurator allows you to select the technical, aesthetic and lighting characteristics of the luminaires that are most suitable for a specific space.
See details)
2N- with dimming without control line; self-regulation
The luminaire's electronic driver has a programmed timer that reduces power by half after 4.5 h from switch-on.
2N+ control-line dimming
The electronic driver has an input connected to the electrical cabinet. When the cabinet activates the voltage on the control line, the driver delivers 100% of the nominal power to the Istanium LED module. When the cabinet disconnects the control line (0 volts), the driver reduces power by half.
CAD headline flux dimming
The luminaire's electronic driver adjusts the supply current of the Istanium LED modules proportionally to the input voltage of the line. The headline electrical cabinet must have a device that regulates the line voltage to reduce the luminaire's light level. This type of dimming is ideal for making use of installations with cabinet equipment already installed.
1N without dimming
The electronic driver delivers 100% of the power with no option to be dimmed. If there is any fluctuation in the line voltage, the driver compensates the supply current of the Istanium LED modules to maintain the luminous flux (input voltage from 208 to 277 Vac). Likewise, if the electrical cabinet has a headline flux dimming equipment, the driver will not dim the lamp (an Istanium LED luminaire with CAD dimming is required).
1-10 dimming governed by 1-10V protocol
The electronic driver delivers the output power to the Istanium LED modules according to the level indicated by the 1-10 signal (usually delivered by a remote management device)
DALI dimming governed by DALI protocol
The electronic driver delivers the output power to the Istanium LED modules according to the level indicated by the DALI signal (usually delivered by a remote management device)
MORE INFORMATION
To go further
)
)
)
)
)